The camera and monitor are built-in rechargeable battery, it can work on battery or DC power adapter.
This baby monitor is two-way communication, you can talk and hear baby’s voice, and also baby can talk and hear your voice.
If there is no signal,you can try to change the channel. If you could not pair the camera and monitor again, message to me ,I will show you the pairing video.
* 1pcs 7mm 5V Power Adapter for Parent Unit ( Receiver)
* 1pcs 9mm 5V Power Adapter for Baby Unit (Transmitter)
* 1pcs AV Cable
* 1pcs Use’s Manual (English Language)
1) the matters needing attention
Do not open the case! Otherwise you will have to get an electric shock danger!
Touch the parts of dc converter may cause electric shock.
Avoid using this product contact with water or other liquid, otherwise there will be a risk of electric shock or fire! For your safety, please use the product provided by the power converter (due to the use of a converter caused by products offered by our factory, manufacturer is not responsible for)
(2) the safety instructions
Do not use damaged rechargeable battery or charger
Don’t make rechargeable battery charging time in excess of the prescribed charge time
The battery or the battery be used for the first time after a few months did not use to use, please recharge battery completely.
For use fully charged batteries, to its fully discharge, then recharge it again, in order to ensure a long service life.
Be careful not to let any of the conductor and make the dc converter end or charging the battery short-circuit, avoid electric shock or fire.
(3)Product problem analysis table
Fault 1: No signal
The solution:Check whether the power adapter of the camera connection in place, again to determine whether a camera and monitor in effective range, is usually a indoor 10 to 30 meters.
Fault 2:Camera at night work, infrared night-vision light did not shine
The solution:Infrared night-vision light itself is not shine, but they are working. Don’t worry!
Fault 3:In the TV signal output mode, the monitor can only hear the sound, can’t see the images.
The solution:In television output mode, monitor can only hear the sound, can’t see the image. It is normal.
Fault 4:When a camera with 3 AAA batteries work, there will be a white waves appeared
The solution:Tests for whether the battery is enough, it is better to replace a new battery for its use.